|Place of Origin:||China|
|Brand Name:||Taigu Lide|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Wooden cases for aerosol filling machines|
|Delivery Time:||10-15 work days|
|Payment Terms:||L/C, D/A, T/T, Western Union, MoneyGram, D/P|
|Supply Ability:||100 sets per month|
|Production Capacity:||5000-8000cans/shift(8 Hours)||Working Pressure:||0.65-1.0Mpa|
|Application:||Body Spray||Material:||316 Stainless Steel|
Semi Automatic Insecticide Pesticide Spray Aerosol Filling Machines
This semiautomatic aerosol filling machine is made from the former semi automatic aerosol filling machine. It assembles the liquid filling, inflate and seal on the same table, it needs only one worker to operate the semi automatic aerosol filling machine. The semi automatic aerosol filling machine has high speed , high-accuray and good stabilization. This semi automatic aerosol filling machine is a good choice for the midium-sized and small aerosol company.
1. This equipment is pneumatic, must use an air compressor to power&run the machines, no electricity, very safe and reliable, and widely used in many kinds of aerosol products filling.
2. The key pneumatic components, fittings and metering cylinder seals are imported high-quality products, which ensure the full set of machine performance is of reliability, security, lower fault rate, and long life.
3. Aerosol filling machine is widely used to package the aerosol products in cosmetic, chemical, fire control, automobile, pesticides, medical, petroleum, food industry, such as hair spray, mousse, insecticide, air freshener, cleaning agents, fire extinguishing agents, painting, etc.
|Model||CJXH-1600A 3 in 1||CJXH-1600B 3 in 3|
|Production capacity:||3000-5000cans/shift(8 hours)||5000-8000cans/shift(8 hours)|
|Max liquid volume(ml):||20-750ml(can be chosen)||20ml, 50ml, 100ml, 300ml, 500ml, 1000ml(can be chosen)|
|Max Gas volume(ml):||20-500ml(can be chosen)||20ml,50ml,100ml,200ml,400ml,500ml(can be chosen)|
|Available valve:||1”(25.4mm) and 20mm metered valve||1”(25.4mm) and 20mm metered valve|
The device should be placed in the appropriate location of the workshop, adjusting the the foot screws so that the equipment is steady and does not shake. Turn off the four switches in front of the device panel. From left to right as below: