|Place of Origin:||China|
|Brand Name:||Taigu Lide|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Wooden cases|
|Delivery Time:||50 working days|
|Payment Terms:||L/C, D/A, T/T, Western Union, MoneyGram, D/P|
|Supply Ability:||100 sets per month|
|Application:||Fresh Air / Oxygen||Material:||304 Stainless Steel|
|Automaticity:||Automatic||Capacity:||2000-3200 Cans/ Hour|
|Max. Gas Consumption:||5.5 CBM/min|
Automatic Oxygen Gas Spray Aerosol Fresh Air Filling Machines
Vacuum Crimping Part Description
1. The crimping head is mainly used to seal on the corrected and pressed valve with internal expanding mode. It needs to finish two steps respectively. Firstly, the pressure cylinder presses valves on the opening to make the valve rubber gasket flatten against the opening, usually the compression is 0.2-0.3mm.
2. Then, the pressure cylinder sends a signal to inform sealing cylinder to operate. The capper is fast, reliable, steady and easy to adjust sealed diameter and sealed depth manually without any tool.
Gas Filling Part Description
1. Two gas filling stations are composed by two independent filling machines. Gas filling machine has fully absorbed the advanced filling machine technology from the Swiss Pamasol Company. So as to accelerate filling speed and accurate measuring.
2. The measuring cylinder of inflator is made of 304 stainless steel materials. The processing techniques and precision are the same as the measuring cylinder of filling liquid machine.
3. The seal rings of inflator adopt CFRP skeleton rings of tetrafluoroethylene produced by American, which located in U-groove with stainless steel reeds inside.
4. When seal rings are normally worn in long-term operation, the outer diameter of seal rings will automatically compensate due to the function of reeds.
|Adjustable Sealing Diameter (mm)||26.5~28.5)±0.15|
|Adjustable Sealing Depth (mm)||(0~7)±0.15|
Applicable Aerosol Can Height (mm)
|Working Pressure (MPa)||0.45~0.7|
|Maximum Air Consumption (L/min)||50|
|Maximum Filling Volume (ml)||20-500ml(liquid phase)|
|Repeat Filling Accuracy||±1.0%|
|Applicable Can Model||
|Working Pressure (Mpa)||0.45-0.8Mpa|
|Maximum Air Consumption (L/min)||60|